Sale Price:
$89.99
Original Price:
$99.99
The Last Bimini Strap’s You’ll Ever Buy.
The ProBimini™ takes everything boaters hate about standard factory nylon straps and re-engineers it from the ground up. Crafted right here in the USA from 100% T316 marine-grade mirror-finish stainless steel, zero plastic, zero aluminum and zero nylon; it delivers the lifetime quality TNE is known for: aerospace-grade cable and quality, built for a lifetime of service, no compromises.
KEY FEATURES & BENEFITS
Stunning Visual Upgrade: Remove one of the least premium features of your vessel and make it one of the best; our premium hardware and cable system delivers the quality look and feel you expect from marine components.
Silent at Speed: Aerodynamic 1/8" aircraft-grade wire rope slices through the air cleanly, completely eliminating the violent buffeting, strap flutter, and cockpit noise caused by flat nylon webbing.
100% T316 Marine Stainless Steel: Upgraded beyond standard T304 Stainless Steel, the ProBimini features mirror-polished T316 stainless fittings and cable with an impressive 1,800 lb break strength (3,600 lb per pair) for superior saltwater corrosion resistance and an elevated OEM appearance.
Encased Micro-Adjustment Turnbuckle: Features a sleek protective housing that prevents line snagging while offering up to 4" of precision length adjustment to dial in a rock-solid, custom tension during installation.
Tool-Free Quick Release: Instantly disconnect cables to stow or retract your Bimini in seconds. The heavy-duty spring-loaded locking pin provides vastly superior security over standard snap clips, ensuring your setup stays rock-solid and won't vibrate loose or stretch under dynamic wind load.
Hinged Wrap-Around Deck Mounts: Opens fully to clamp directly onto existing Bimini frame tubing without disassembling Bimini frame hardware or removing any fittings.
Set It & Forget It: While factory nylon sags, stretches, rots, and fades, ProBimini™ aerospace-grade cables maintain consistent, unyielding tension for life.
HOW TO MEASURE & ORDER THE RIGHT SIZE
To select the correct ProBimini™ size for your boat:
Tension Your Bimini First: Using your existing nylon straps, rope, or a temporary ratchet strap, tension your Bimini top until the canvas fabric is pulled completely taut and the frame is rigid in its proper operating position.
Measure: Using a tape measure, find the distance from the center of the screw holes on your deck mount (vessel side) to the centerline of your Bimini frame tubing (Bimini side).
Round: Round your measurement up or down to the nearest whole inch.
Select Your Size:
Example 1: If your measurement is 44 3/8", round down to select the 44" ProBimini™. (Note: The built-in 4" encased turnbuckle provides ample adjustment range to achieve perfect tension).
Example 2: If your measurement is 39 5/8", round up to select the 40" ProBimini™.
SPECIFICATIONS
Origin: Made in the USA
Quantity: One complete pair (Starboard and Port side) including hardware.
Cable Construction: 1/8" Aerospace-Grade T316 Stainless Steel Cable (1,800 lb break strength per side/cable (1,250lbs per complete assembly)).
Hardware Finish: Mirror-Polished Solid T316 Marine-Grade Stainless Steel
Adjustment Range: Micro-Adjustable Encased Turnbuckle, 4” of Range
Length-to-Adjustment Range: EXAMPLE: A 40” system can be adjusted from 38” - 42” from the center of the hull bracket to the center of the Bimini bar ± 10%
Mounting: Hinged Wrap-Around Deck Mount with Positive-Locking Spring Quick-Release Pin
Warranty: TNE 2-Year Full Replacement Limited Warranty
The Last Bimini Strap’s You’ll Ever Buy.
The ProBimini™ takes everything boaters hate about standard factory nylon straps and re-engineers it from the ground up. Crafted right here in the USA from 100% T316 marine-grade mirror-finish stainless steel, zero plastic, zero aluminum and zero nylon; it delivers the lifetime quality TNE is known for: aerospace-grade cable and quality, built for a lifetime of service, no compromises.
KEY FEATURES & BENEFITS
Stunning Visual Upgrade: Remove one of the least premium features of your vessel and make it one of the best; our premium hardware and cable system delivers the quality look and feel you expect from marine components.
Silent at Speed: Aerodynamic 1/8" aircraft-grade wire rope slices through the air cleanly, completely eliminating the violent buffeting, strap flutter, and cockpit noise caused by flat nylon webbing.
100% T316 Marine Stainless Steel: Upgraded beyond standard T304 Stainless Steel, the ProBimini features mirror-polished T316 stainless fittings and cable with an impressive 1,800 lb break strength (3,600 lb per pair) for superior saltwater corrosion resistance and an elevated OEM appearance.
Encased Micro-Adjustment Turnbuckle: Features a sleek protective housing that prevents line snagging while offering up to 4" of precision length adjustment to dial in a rock-solid, custom tension during installation.
Tool-Free Quick Release: Instantly disconnect cables to stow or retract your Bimini in seconds. The heavy-duty spring-loaded locking pin provides vastly superior security over standard snap clips, ensuring your setup stays rock-solid and won't vibrate loose or stretch under dynamic wind load.
Hinged Wrap-Around Deck Mounts: Opens fully to clamp directly onto existing Bimini frame tubing without disassembling Bimini frame hardware or removing any fittings.
Set It & Forget It: While factory nylon sags, stretches, rots, and fades, ProBimini™ aerospace-grade cables maintain consistent, unyielding tension for life.
HOW TO MEASURE & ORDER THE RIGHT SIZE
To select the correct ProBimini™ size for your boat:
Tension Your Bimini First: Using your existing nylon straps, rope, or a temporary ratchet strap, tension your Bimini top until the canvas fabric is pulled completely taut and the frame is rigid in its proper operating position.
Measure: Using a tape measure, find the distance from the center of the screw holes on your deck mount (vessel side) to the centerline of your Bimini frame tubing (Bimini side).
Round: Round your measurement up or down to the nearest whole inch.
Select Your Size:
Example 1: If your measurement is 44 3/8", round down to select the 44" ProBimini™. (Note: The built-in 4" encased turnbuckle provides ample adjustment range to achieve perfect tension).
Example 2: If your measurement is 39 5/8", round up to select the 40" ProBimini™.
SPECIFICATIONS
Origin: Made in the USA
Quantity: One complete pair (Starboard and Port side) including hardware.
Cable Construction: 1/8" Aerospace-Grade T316 Stainless Steel Cable (1,800 lb break strength per side/cable (1,250lbs per complete assembly)).
Hardware Finish: Mirror-Polished Solid T316 Marine-Grade Stainless Steel
Adjustment Range: Micro-Adjustable Encased Turnbuckle, 4” of Range
Length-to-Adjustment Range: EXAMPLE: A 40” system can be adjusted from 38” - 42” from the center of the hull bracket to the center of the Bimini bar ± 10%
Mounting: Hinged Wrap-Around Deck Mount with Positive-Locking Spring Quick-Release Pin
Warranty: TNE 2-Year Full Replacement Limited Warranty
Image 1 of 11
Image 2 of 11
Image 3 of 11
Image 4 of 11
Image 5 of 11
Image 6 of 11
Image 7 of 11
Image 8 of 11
Image 9 of 11
Image 10 of 11
Image 11 of 11